Máy khuấy trộn hóa chất Cemco Việt Nam

Trạng thái:

Còn hàng

Số lần xem:

3838

0906860208

Đại lý CEMCO Việt Nam - CEMCO Vietnam có thư ủy quyền chính hãng

The CCM mixer is a miniaturized, lightweight, and high performance mixer of a new type that has been created by CEM Corporation's proprietary design by mainly focusing on reaction and mixing.
We firmly believe that the mixer can contribute to any and all the experimental equipment and water treatment plants, etc

Chia sẻ:

Thông tin sản phẩm

・A high efficiency impeller that has been newly developed produces great mixing force.

・The size is 1/2 of that of conventional mixers (belt-driven type).

　It is a miniaturized and lightweight type that can installed onto a PE tank or PVC tank.

・Weight reduction has been realized by a combination of AES, aluminum, etc.

・By employing pipe exterior specifications, the metal parts do not contact liquid,

　thereby realizing excellent corrosion resistance.

・The timing belt method is employed. Low noise and long service life of the belt have been realized

　by our proprietary design.

・Received a 2004-2005 Good Design Award.

Applications

・Mixing in a reaction tank made of plastics

・Mixing of corrosive liquid

・Dissolution of powder, granular and flaky chemicals

・Mixing for reaction in a pH neutralization tank or water treatment plant

・Homogenization of liquid

Specifications

Type	Type CCM-100		Type CCM-150
Output	100W		150W
Voltage	100V(single phase)	200V(single phase)	200V(three phase)	380V(three phase)50hz
Rated current	2.2/2.3A	0.7/0.64A	0.9/0.85A	0.5A(50Hz)
Number of revolutions	370/450rpm
Maximum mixing capacity	1,000L		2,000L
Ambient temperature for use	40℃
Maximum operating temperature	80℃
Maximum liquid viscosity	300cP
Maximum liquid specific gravity	1.3
Method of speed reduction	Timing belt
Protection class	IP54 or equivalent
Installation	JIS10K65A Flange
Shaft	φ16×900L　made of SUS316-grade stainless steel
Impeller	φ175/φ145(50Hz/60Hz)　made of PPC　3-vane propeller		φ195/φ165(50Hz/60Hz)　made of PPC　3-vane propeller
Optional items	Change in shaft length (maximum: 1,200L), change in shaft material, change in impeller diameter, change in impeller material (PPS, PVDF), pipe exterior
Main body weight	About 10kg

*The maximum mixing capacity shows performance with clear water. The mixing capacity decreases if the solution to be mixed has a viscosity or specific gravity that is higher than that of clear water.
*The standard material of the liquid contact parts are: SUS316-grade stainless steel for shaft, and PPC for the impeller.
*Mixing of a solvent, etc. cannot be performed.
*The mixer cannot be used in an explosion-proof area.